Filter
Top Products
TR Open Failed
Meaning: The token ring device failed in its attempt to insert into the ring. This
usually results from trying to insert to a ring at the wrong speed (4 or 16
Mbits).
Action: Verify and select the proper ring interface speed for this line.
Unable to perform update for dlci
Meaning: For the indicated frame relay circuit, an operator tried to modify a DLCI
but the system was unable to perform the requested modification.
Possible problems are adding a DLCI that has already been added or
deleting a DLCI that isn’t present.
unable to read configuration summary
Meaning: Unable to read the V.25 bis map configuration.
Action: Check your IP-mapping configuration for errors.
unable to read ip map record
Meaning: Unable to read the V.25 bis IP-mapping configuration.
Action: Check your IP-mapping configuration for errors.
Unexpected remote reset to local
Meaning: This message occurs at one end of a point-to-point link when the
connection is first being established. One end of the link usually comes
up before the other end. The first end subsequently receives a reset
request from the other end when it comes up. The side that comes up
first displays the above message, which always appears in tandem with
the “Responded to reset, service continued” event message.
Unexp ring ind, will rcv inbound call
Meaning: Router already received an incoming call message and just got another
one. The incoming call will be accepted if it doesn’t fail any user-
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-55