Filter
Top Products
Cfg: number zone names incorrect for
ccg
Meaning: The circuit group specified by ccg has been configured as a seed port.
The directly connected network is serviced not only by this seed, but
also by another seed router already in service. The zone name lists
conveyed by these seed routers are inconsistent; each list contains a
different number of zone entries.
Action: One of the seed routers must be reconfigured to ensure the consistency
of the zone name lists. If you reconfigure the AppleTalk router to match
the zone name list of the in-service router, no further changes are
necessary. If you reconfigure the in-service router to match the zone
name list of the AppleTalk router, however, you must restart all network
nodes and routers.
Cfg: NULL zone name cfg’d for
ccg
Meaning: The AppleTalk router has configured a null zone name for the circuit
group specified by
ccg
. The value entered for the Zone Name parameter
was invalid.
Action: Configure a valid zone name for the circuit group specified by ccg.
Cfg: too many zone names cfg’d for
ccg
Meaning: More than ten zone names have been added to the zone name list
associated with the circuit group specified by ccg.
Action: No action is required. The AppleTalk router ignores any zone names
beyond the maximum value of ten.
Cfg: Zone name greater than 32 chars
Meaning: AppleTalk zone names must be <= 32 characters in length. An ‘‘illegal
default zone’’ event or an ‘‘illegal zone name’’ event will follow to show
the invalid zone name.
Action: Use Quick Configuration or the Configuration Editor to correct the zone
name.
Event Log
Messages
17
Event Log Messages
at: AppleTalk Event Messages
17-9