HP (Hewlett-Packard) 200 Network Router User Manual


 
Bandwidth Reservation
Reserves percentages of the total available bandwidth on a WAN circuit for the
transmission of high, normal, and low priority packets. Use this feature to prevent
any one priority from taking over the entire bandwidth of a circuit.
Default: High Priority (34%)
High Priority
Reserves 34% of the total available bandwidth.
Normal Priority
Reserves 33% of the total available bandwidth.
Low
Reserves 33% of the available total bandwidth.
Bridge Flood
multicast DLCI
Refer to ‘‘Multicast Support’’ on page 4-22.
Call restrictions
Specifies which inbound phone numbers will be accepted via V.25 bis media from
other routers.
Default: Allows all incoming calls.
Allow all
incoming calls
Accepts all incoming calls.
Allow defined inbound
call
number
Accepts inbound calls only from the telephone numbers listed with the Allowed
inbound call numbers option. If you don’t want to allow any inbound calls, use this
option and leave the Allowed inbound call numbers empty.
Channel Management
Selects the type of channel management.
Default: Not Used
Disable Management
Turns off the channel management capability in a terminal adapter with configured
channel management. Use this value only when your terminal adapter has channel
management capability that you don’t want it to use.
Delta Management
Causes a terminal adapter with channel management capability to use the maximum
bandwidth allowed for channel management. Refer to the manual for your terminal
adapter for more information.
Minimal Management
Causes a terminal adapter with channel management capability to use a minimal
portion of its channel bandwidth for channel management. Refer to the manual for
your terminal adapter for more information.
Circuit Parameters
Parameters and Options
4-6