Filter
Top Products
Action: Reduce the overall size of memory resoures allocated by the
configuration. (For example, reduce table sizes on other configuration
parameters where possible.)
insufficient mem on cct
X
for phone #
Meaning: There is no system memory available for the given V.25 bis circuit (cct)
to allocate storage for phone numbers. This circuit is not available for
use.
Action: Reduce the overall size of memory resoures allocated by the
configuration. (For example, reduce table sizes on other configuration
parameters where possible.)
Internal clock being generated
Meaning: This router is providing a clock because a modem eliminator cable was
detected with the clock source end attached to this router.
Action: If there are problems with the link, ensure that the router on this end of
the cable is configured for internal clock source and the router on the
other end of the cable is configured for external clock source.
Invalid Configuration
Meaning: A Point-to-Point configuration that does not use auto-detect is being
used and is incompatible with the remote device.
Action: Use auto-detect to configure the Point-to-Point WAN circuit on either
the local or the remote device.
Invalid message type XXX
found
Meaning: For the indicated frame relay circuit, a management message was
received with an unknown or invalid message type. Valid values are:
0x7D Status
0x75 Status Enquiry
0x7B Status Update
XXX identifies the message type that was found.
Event Log Messages
cct: Circuit Event Messages
17-32