Filter
Top Products
Selftest failed on slot
slot #
Meaning: The port module in the specified slot of an HP Router 650 has failed
selftest.
Action: Determine the source of the failure by using the procedure described
under ‘‘Card/Slot Failure During Self-Test’’ in the ‘‘Troubleshooting’’
chapter of the router installation manual. If the test indicates failure of
either the slot or the port module, contact your HP service provider.
Selftesting Port Module slot
slot #
Meaning: The port module in the specified slot is being self-tested.
Selftest passed on slot
slot #
Meaning: The port module in the specified slot has completed selftest
successfully.
slot
slot #
HW ID and line configuration mismatch
Meaning: The port module inserted in the specified slot does not match the
expected value and will not be initialized.
Action: Change the configuration for the slot and reboot.
Uploading crash record from slot
slot #
Meaning: After detecting a critical failure on the port module, the router
software will upload a crash record and make an entry in the
crash log. You can view the crash record using the NCL Crash command.
Event Log Messages
pm: Port Module Manager Event Messages
17-116