HP (Hewlett-Packard) 200 Network Router User Manual


 
remote station’s LQM time > configuration time
Meaning: For the indicated PPP circuit, the Link Quality Monitor (LQM) time that
the remote station is willing to negotiate for is greater than the LQM
time configured for the PPP circuit. The higher LQM time is accepted,
but it means that the remote station will be sending Link Quality Report
packets less often than the system originally requested.
Responded to reset, service continued
Meaning: The router has received (and processed) a reset request from the remote
end. Refer also to “Unexpected remote reset to local” on page 17-55 in
this section.
Retrying LLC2 connection
Meaning: The circuit identified in the object field of the event message has been
unable to obtain positive acknowledgment of an outstanding frame. It
will continue to retry the connection as specified by the Retry Counter
(N2), Retry Timer (T1), and Connect Retries LLC2 parameters.
Sent CIC cmd to connect call
Meaning: The router has sent a CIC command in response to an incoming call to
establish a connection.
Sent CRN cmd to
XXX
Meaning: The router has sent a CRN command with the listed number XXX.
Sent DIC cmd to disconnect call
Meaning: The router has sent a DIC command in response to an incoming call to
prevent establishing a connection.
Server has logged in to remote station
Meaning: For the indicated PPP circuit, the system successfully logged in to the
remote station.
Event Log Messages
cct: Circuit Event Messages
17-48