Filter
Top Products
Data pkt received on downed connection
Meaning: The adapter sent data packets on a link that was not connected. (The
DSR line was down.) This is not expected when the router is in manual
adapter mode.
Action: Check the adapter configuration. Make sure that it raises DSR when the
phone call is established.
DCE set DSR TRUE before DTE sent XXX
Meaning: The router was about to send a v.25 bis command (XXX0) when the
terminal adapter unexpectedly pulled up DSR. This indicates that the
router and adapter are out of synchronization during a V.25 bis
exchange. The router will drop DTR and re-attempt the connection if the
retry count permits.
Action: No user action required. The router will try to re-syncronize the
connection. If this happens frequently, check the adapter configuration.
DCE set DSR while sending CFI
Meaning: While the router was waiting for the connection time to expire before
retrying connection establishment, the terminal adapter unexpectedly
pulled up DSR. This indicates that the router and adapter are out of
synchronization during a V.25 bis exchange. The router will drop DTR
and re-attempt the connection if the retry count permits.
Action: No user action required. The router will try to re-syncronize the
connection. If this happens frequently, check the terminal adapter’s
configuration.
DCE set DSR while waiting for CTS
Meaning: While the router was waiting for the clear to send (CTS) line to come up,
the terminal adapter unexpectedly pulled up DSR. This indicates that the
router and terminal adapter are out of synchronization during a V.25 bis
exchange. The router will drop DTR and re-attempt the connection if the
retry count permits.
Event Log Messages
cct: Circuit Event Messages
17-26