HP (Hewlett-Packard) 200 Network Router User Manual


 
egp: EGP Information Base
The Exterior Gateway Protocol “egp” information base contains
variables that describe the transmission and reception of messages by
the
EGP protocol. The structure is the following:
egp
variables listed below
The pathname is constructed as follows:
egp.variable
The variables are listed alphabetically:
bad_asn contains the number of received
EGP messages that con-
tained an unrecognized autonomous system number in the
EGP header.
bad_cod contains the number of received
EGP messages that con-
tained an unrecognized value in the Code field of the
EGP header.
bad_hel contains the number of unexpected Hello neighbor reacha-
bility messages received by
EGP. A Hello message is unexpected when
received from a passive peer.
bad_ihu contains the number of unexpected I Hear You neighbor
reachability messages received by
EGP. An I Hear You message is
unexpected when received in the absence of a prior Hello message.
bad_stt contains the total number of received
EGP messages that
contained an unrecognized value in the Status field of the
EGP header.
bad_sum contains the total number of received
EGP messages that
contained a faulty checksum in the
EGP header.
bad_type contains the total number of received
EGP messages that
contained an unrecognized value in the Type field of the
EGP header.
bad_ver contains the total number of received
EGP messages that
contained an invalid
EGP version number in the EGP header. The
router’s
EGP implementation supports EGP version 2.
Managment
Information Base
18
Management Information Base Variables
egp: EGP Information Base
18-61