HP (Hewlett-Packard) 200 Network Router User Manual


 
rx contains the total number of IP datagrams received by interface
ip-address.
tx contains the total number of IP datagrams transmitted by
interface ip-address.
ulp contains the total number of IP datagrams delivered by the
router to one of three upper-level protocols (Internet Control Message
Protocol, Transmission Control Protocol, or User Datagram Protocol)
for processing.
Routing Table
cache_hits contains the number of times the IP address was not
found in the forwarding table and was found in the IP address cache,
which contains the previous IP address found.
mem_used contains the number of bytes of memory used by the IP
routing table.
node_count contains the current number of networks contained in
the IP routing table.
node_depth contains the number of levels in the IP routing table.
search_count contains the number of searches through the IP
routing table. Upon receiving a packet for forwarding, the router first
checks its cache to determine the next hop to the destination address. If
not found there, the router then accesses the IP routing table.
search_depth contains the total depth of searches through the
routing tree.
Managment
Information Base
18
Management Information Base Variables
ip: IP Information Base
18-67