Filter
Top Products
Action: Modify the configuration to ensure that it includes circuit records for all
circuits.
No Token Ring circuits configured
Meaning: This is a possible error condition in that no circuits have been
configured for a router having one or more token ring ports. None of the
circuits will be used.
Action: Check your network topology to see if any of the token ring
circuits should be configured.
Pass-thru protocol enabled on cct
cct#
’ driver: (LLAN
local-address
RLAN
remote-address
)
Meaning: The synchronous pass-through protocol is enabled on cct#. The
configured local and remote station addresses are shown also.
Rx FRMR on circuit
cct
# Frame:
hh hh hh hh hh
Meaning: Circuit cct (running LLC) has received a frame reject frame. hh hh hh
hh hh is the first five bytes of the frame in hexadecimal format.
SYNC circuit assigned to multiple lines
Meaning: One or more line records contains references to the same point-to-point
circuit.
Action: Modify the line configuration to ensure that all line and circuit records
are consistent.
Token Ring circuit assigned to multiple lines
Meaning: A circuit has been assigned to more than one line on this router. Proper
operation requires that a circuit be configured to only one line.
Action: Check the lines configuration to ensure that the token ring circuit name
is assigned to only one token ring line.
Event Log Messages
dev: Device Event Messages
17-66