HP (Hewlett-Packard) 200 Network Router User Manual


 
Enter the lowest IPX network number in this field and enter the highest network
number in the Dest Network (high) field if you are filtering a range of IPX
destination networks.
Enter the Network list name in this field and leave the Dest Network (high) field
blank if you want to use a Network list to establish the upper and lower range of
destination network numbers.
For additional information, refer to “Dest Network (high)” earlier in this chapter.
For more information about Network lists, refer to “Network Number (high)” and
“Network Number (low)” later in this chapter.
Dest Socket (high)
Sets the upper boundary of the range for filtering an IPX packet based on the
contents of its destination socket field.
Options
Leave this field blank if you do not want to filter IPX destination sockets.
Leave this field blank and enter the IPX socket number in the Dest Socket (low)
field if you are filtering a single IPX destination socket.
Enter the highest IPX socket number in the range if you are filtering a range of
IPX destination sockets.
Leave this field blank and enter the name of the Socket list in the Dest Socket
(low) field if you want to use a Socket list to establish the upper and lower range
of IPX destination socket numbers.
For additional information, refer to “Dest Socket (low)” later in this chapter. For
more information about Socket lists, refer to “Socket (high)” and “Socket (low)”
later in this chapter.
Dest Socket (low)
Sets the lower boundary of the range for filtering an IPX packet based on the
contents of its destination socket field.
Options
Leave this field blank if you do not want to filter IPX destination sockets.
Enter the IPX socket number in this field and leave the Dest Socket (high) field
blank if you are filtering a single IPX destination socket.
Enter the lowest IPX socket number in this field and enter the highest socket
number in the Dest Socket (high) field if you are filtering a range of IPX
destination sockets.
Enter the Socket list name in this field and leave the Dest Socket (high) field
blank if you want to use a Socket list to establish the upper and lower range of
destination socket numbers.
IPX Protocol Parameters
Parameters and Options
11-8