Boot: Rebooting the Router
Use NCL’s Boot command to reboot the router. Any changes in
configuration or password will take effect, and the console session is
restarted.
Note If you see “NCL ERR--invalid command (ignored)” in response
to the Boot command, it is possible you did not use the manager pass-
word when starting this console session or did not enter the manager
password when prompted in this command.
Syntax
boot The console displays “Enter current manager
password” if a manager password exists.
mgr mgr is the current manager password, required if
assigned. The console displays “Do you want to
reboot the system? [y/n]”.
y (Answer yes to go ahead and boot.)
Using the Network Control Language
Managing Router Operations and Resources
16-5
