Filter
Top Products
No
Disables check summing.
Yes
Enables check summing.
Dest Host (high)
Sets the high boundary of the range for filtering an XNS packet based on the
contents of its destination host field.
Options
Leave this field blank if you do not want to filter XNS destination hosts.
Leave this field blank and enter the XNS host number in the Dest Host (low) field
if you are filtering a single XNS destination host,
Enter the highest XNS host number in the range if you are filtering a range of XNS
destination hosts.
Leave this field blank and enter the name of the Host list in the Dest Host (low)
field if you want to use a Host list to establish the upper and lower range of XNS
destination host numbers.
For additional information, refer to “Dest Host (low)” later in this chapter. For more
information about Host lists, refer to “Host (high)” and “Host (low)” later in this
chapter.
Dest Host (low)
Sets the lower boundary of the range for filtering an XNS packet based on the
contents of its destination host field.
Options
Leave this field blank if you do not want to filter XNS destination hosts.
Enter the XNS host number in this field and leave the Dest Host (high) field blank
if you are filtering a single XNS destination host.
Enter the lowest XNS host number in this field and enter the highest host number
in the Dest Host (high) field if you are filtering a range of XNS destination hosts.
Enter the Host list name in this field and leave the Dest Host (high) field blank if
you want to use a Host list to establish the upper and lower range of destination
host numbers.
For additional information, refer to “Dest Host (high)” earlier in this chapter. For
more information about Host lists, refer to “Host (high)” and “Host (low)” later in
this chapter.
Dest Network (high)
Sets the high boundary of the range for filtering an XNS packet based on the
contents of its destination network field.
Options
Leave this field blank if you do not want to filter XNS destination networks.
XNS Router
Parameters
10
Xerox Network Systems (XNS) Router Parameters
Parameters and Options
10-5