Filter
Top Products
Providing quality of service to remote
Meaning: Follows the “circuit in auto-detect mode” message and indicates the
Quality of Service parameter setting in the local router for the indicated
circuit.
Pkts rcvd while waiting for outbound data
Meaning: The router was waiting for outbound data so that it could establish a
connection when inbound data was received from the adapter.
Action: Check the router configuration. In manual adapter mode, the router
should only initiate a connection outbound when set up to enable on
data available. If this is the side that should initiate the call, check the
adapter configuration so that it doesn’t auto answer.
Physical level error
Meaning: The LAN controller or link level controller has detected a Level 1
(physical media) error.
Action: Verify hardware integrity.
Pool cct must enable on data avail
Meaning: V.25 bis pool circuits must be configured to enable when data is
available. This is a warning to the user of the misconfiguration. The
circuit will be used as if set up to enable when data is available.
Action: Check your configuration file and correct the V.25 bis circuit
misconfiguration.
possible loop-back has been detected
Meaning: For the indicated PPP circuit, PPP detected a possible line loopback.
ppp: bad configuration file
Meaning: PPP detected an inconsistency in the configuration.
Event Log Messages
cct: Circuit Event Messages
17-40