Filter
Top Products
interface is considered unstable and is taken down. This message
indicates that this situation ha s occurred.
Free pkt buffs available V.25 bis clipping disabled
Meaning: The the backlog has been relieved. Packet buffers can again be queued
on V.25 bis circuits as necessary.
Free pkt buffs low V.25 bis clipping enabled
Meaning: The amount of memory used for packets is low, The router will drop
some of the oldest packets queued on V.25 bis mapped circuits that are
waiting to be established.
Action: This should only happen if many IP-mapped circuits are waiting to come
up. If this only occurs infrequently, it may be acceptable depending on
the applications. To solve this, add more V.25 bis circuits to the pool, or
re-arrange traffic so that not as many circuits are queued waiting for an
available line. (Higher speed V.25 bis lines may also help.)
illegal packet received
Meaning: For the indicated PPP circuit, a packet was received that did not
conform to standard PPP format. The packet was dropped. No further
action is necessary.
Initialization Error, SIFSTS =
XXXX
Meaning: Initialization of the token ring device has failed, indicating a possible
hardware or operating system failure.
Action: Note the code number in the event message and contact your
Hewlett-Packard representative.
insufficient mem on cct
X
for
cct
Meaning: There is no system memory available for the given V.25 bis circuit (cct)
to be allocated. This circuit is not available for use.
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-31