Filter
Top Products
Missing remote file name
Meaning: The remote file name was not included with the Zput command.
Action: The remote file name to transfer into must be entered.
NCL ERR — invalid command (ignored)
Meaning: This is a generic error indicating that either the command was mistyped
or that manager capability is required to use the command. For
Zmodem, this occurs with Zget if you did not use the manager password
when you started the console session.
Unable to allocate memory for zmodem protocol
Meaning: The buffer space required for the zmodem protocol transfers is not
available currently. This indicates that all the router memory is currently
in use for other tasks or for the routing table.
Action: Wait for the router traffic load to decline, then try again.
Logged and Displayed Zmodem Event
Messages
The following messages appear in the log file and in the console display.
For messages that appear only in the console display, see page 17-149.
Bad escape sequence received %x
Meaning: Indicates that an unknown escape sequence was received by the router.
Either the packet was corrupted during transmission or the host was
running another protocol.
Action: Check the serial line for a poor connection or source of noise. Also
verify that the host is running Zmodem.
Event Log Messages
zmodem: Zmodem Event Messages
17-150