HP (Hewlett-Packard) 200 Network Router User Manual


 
Rgetb: Displaying the Bridge
Forwarding/Filtering Table
Use NCL’s Rgetb command to format and display the bridge
forwarding/filtering table for a local or remote HP or Wellfleet router.
Syntax
rgetb [X.X.X.X] [community]
[X.X.X.X] (optional) is the IP address of the local or remote
router in dotted decimal notation. If you omit this field, an IP
address on the local router will be used.
[community] (optional) is the name of the SNMP community
that grants access to that node. If you omit the name, “public” is
used. If you include a name, the IP address must also be included.
Example
rgetb 15.2.1.94
Displays the bridge forwarding/filtering table for the node whose
IP address is 15.2.1.94:
Physical Addr Src Dst CctGrp IF
080009000411 F F Ether1G 1
0800098333ab F F WAN1G 1
The fields in the table are as follows:
Physical Addr lists the station (also called physical or MAC)
addresses learned by the bridge.
Src lists the disposition of frames containing Physical Addr
in the source address field of the Ethernet frame, as follows:
F forwarded
D dropped
Dst lists the disposition of frames whose destination is
Physical Addr.
F forwarded
D dropped
CctGrp lists the circuit group connected to Physical Addr.
IF lists the sequential number the router assigned to the network
interface that corresponds to CctGrp.
NCL
Commands
16
Using the Network Control Language
Accessing Bridging and Routing Tables
16-59