Filter
Top Products
Enter the Area list name in this field and leave the Source Node (high) field blank
if you want to use an Area list to establish the upper and lower range of DECnet
source nodes.
For more information, refer to “Source Node (high)” earlier in this chapter. For more
information about Area lists, refer to “Area (high)” and “Area (low)” earlier in this
chapter.
WAN Protocol
Identifies the WAN protocol for the circuit providing service to the remote target.
Default:
Frame Relay
Frame Relay circuits provide a transmission channel between the router and a frame
relay network. The transmission channel supports multiple protocols.
SMDS
Switched Multi-megabit Data Service (SMDS) circuits provide a transmission
channel over V.35 (synchronous media) between the router and an SMDS data
service unit (DSU) or switch.
X.25
X.25 packet switched circuits three levels of X.25 service—X.25 DDN, X.25 PDN, and
X.25 PPP (Point-to-Point Protocol). For additional information about the services
supported by X.25 packet switched circuits, refer to Chapter 13, “X.25 Parameters.”
DECnet Parameters
Parameters and Options
8-14