HP (Hewlett-Packard) 200 Network Router User Manual


 
Maximum Packet Size...4-20
Min Frame Spacing...4-20
Minimum connect duration (sec)...4-21
Modulus...4-21
Monitored Events...4-22
Multicast Support...4-22
Password of Remote Station...4-23
Perchannel bandwidth...4-23
Permanent Virtual Circuit...4-23
Point-to-Point Address...4-23
Poll Interval (seconds)...4-24
Provide InARP...4-24
Quality of Service...1-5, 4-24
Relay Timer (T1)...4-26
Remote Address...1-5, 4-25
Remote signal & sense timeout (sec)...4-26
Remote Signal and Sense...4-25
Remote Station Number...4-26
Send CIC on all allowed INCs...4-26
Server Password...4-27
Server User ID...4-27
Subaddress...4-27
Use DXI v3.2...4-27
Use Heartbeart Poll...4-27
Use SNAP...4-28
Use UPAP...4-28
User ID of Remote Station...4-28
Xcvr Signal Polling...4-29
Clear button...16-15
Clock Source...3-3
Clock Speed...3-3 - 3-4
clock speed limit, RS-232 cable...3-4
clock, at boot...1-9
Community Name...9-3
Compression...4-9
compression limitation...4-9
Conditional Circuit Group...7-9
Config...16-6, 16-32
Configuration editor
menu path...A-2
parameters, finding...A-2
configuration, changing...16-21
configuration, download...16-100
configuration, remote...16-20
Conflict Alert...16-26
Connect inactivity time (sec)...4-10
Index
Index-5