HP (Hewlett-Packard) 200 Network Router User Manual


 
Fget: Loading the Operating Code or
Configuration
Use NCL’s Fget command with TFTP to download router operating code
or a configuration from another HP router on an attached network,
using TFTP. The routers must have IP routing and TFTP configured and
enabled. See the TFTP security notes on page 16-94.
Note The following limitations apply to the source of operating code
downloaded from one router to another using Fget:
Destination Router Version Source Router
J2540A or J2540B B J2540A or J2540B only
27289B or J2543A A 27289B or J2543A only
27285/86/87/88/89/90A A 27285/86/87/88/89/90A only
J2530A A J2530A only
Syntax
fget X.X.X.X os file download router operating code
fget X.X.X.X config file download router configuration
X.X.X.X is the IP address of the remote router or host in dotted
decimal notation.
fileis one of the following on the remote node:
os operating code on the router.
config configuration on the router.
filename is the name of the configuration or operating code
file on the remote host.
Examples
fget 15.3.0.97 os os
fget 15.3.0.97 config config
In response, you will be informed of the progress and successful
or unsuccessful completion of the transfer.
Using the Network Control Language
Using TFTP To Transfer Operating Code, Configuration, and NCL Display
16-94