HP (Hewlett-Packard) 200 Network Router User Manual


 
min channel number > max (min set to
X
)
Meaning: The router configuration has the minimum channel number greater than
the maximum channel number. The router will correct this.
Action: Correct the router configuration.
Minimum Latency cap being used
Meaning: A minimum latency cap of 3100 bytes is being used because the latency
cap time is too small for the current link speed.
missed receiving
XX
LQRs: link is down
Meaning: For the indicated PPP circuit, XX Link Quality Monitor (LQM) time
periods elapsed without a Link Quality Report (LQR) packet being
received from the peer (remote) station. The link is declared down, the
Link Control Protocol (LCP) is brought down, and all active network
control protocols are also brought down. If the LCP Auto-Restart option
is enabled, then the router attempts to restart LCP.
missed
XX
Echo Replies: link is down
Meaning: For the indicated PPP circuit, XX Echo Request time periods elapsed
without an Echo Reply packet being received from the remote station.
The link is declared down, the Link Control Protocol (LCP) is brought
down, and all Network Control Protocols are also brought down. If the
LCP Auto-Restart option is enabled, the router attempts to bring LCP up
again.
missed
XX
LQRs: link is down
Meaning: For the indicated PPP circuit, XX Link Quality Monitor (LQM) time
periods elapsed without a Link Quality Report (LQR) packet being
received from the peer (remote) station. The link is declared down, the
Link Control Protocol (LCP) is brought down, and all Network Control
Protocols are also brought down. If the LCP Auto-Restart option is
enabled, the router attempts to bring LCP up again.
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-37