Intel® PXA26x Processor Family Developer’s Manual 3-33
Clocks and Power Manager
3.5.11 Reset Controller Status Register (RCSR)
The CPU uses the RCSR, refer to Table 3-19, to determine what caused the last reset. The
processor can be reset in four ways:
• GPIO reset
• Sleep mode
• Watchdog reset
• Hardware reset
Refer to Table 2-4, “Effect of Each Type of Reset on Internal Register State” on page 2-7 for details
of the behavior of different modules during each type of reset.
Each RCSR status bit is set by a different reset source and can be cleared by writing a 1 back to the
bit. The RCSR status bits for watchdog reset, sleep mode, and GPIO resets have a hardware reset
state of zero.
This is a read/write register. Ignore reads from reserved bits. Write zeros to reserved bits.