Plotting a Measurement to Disk
The plot
llles
that you generate from the analyzer, contain the HPGL representation of the
measurement display. The
files
will not contain any setup or formfeed commands.
1.
Configure
the analyzer to plot to disk.
a.
Press
LLocal)
.~~~~~~~~~~~.:
J+g#pEB
PORT
&i!
.
.i
b-
Press
I-)
~.~~~~~~~,~~;,
and
select
the
&Sk
&he
that
you
m
plot
to.
i
i
.A......
L
.._...............
The analyzer assigns the
first
available default
lilename
for the displayed directory. For
example, the analyzer would assign PLOTOOFP for a LIF format
(PLOT00
. FP for a DOS
format) if there were no previous plot
files
saved to the disk.
The figure below shows the three parts of the
file
name that is generated automatically by
the analyzer whenever a plot is requested. The two digit sequence number is incremented
by one each time a file with a default name is added to the directory.
OUTPUT FORMAT CODE THAT INDICATES THE PLOT
QUADRANT POSITION OR FULL PAGE.
PLOT FILES SEQUENCE NUMBER
(00
TO 31)
ROOT OF FILENAME
ph648c
Figure 4-8. Automatic File Naming Convention for
LIF
Format
Printing, Plotting, and Saving Measurement Results
4-l
8