Filter
Top Products
Using Freelance
‘Ib
view plot files in Freelance, perform the following steps:
1. From the FILE pull-down menu, select IMPORT.
2. Set the
file
type in the dialog box to HGL.
Note
The network analyzer does not use the
sulllx
*.HGL, so you may want to
change the
tllename
filter to
*.
*
or some other pattern that will allow you to
locate the
llles
you wish to import.
3. Click OK to import the
file.
n
You will notice that when the trace is displayed, the text annotation will be illegible. You
can easily
ti
this with the following steps:
a. From the TEXT pull-down menu select FONT.
b. Select the type face and size. (Fourteen point text is a good place to start.)
c. Click OK to resize the font.
w
If you wish to modify the color of the displayed text, perform the following steps:
a. From the ARRANGE pull-down menu select
UNGROUP.
b. Highlight a piece of text.
c. From the STYLE pull-down menu select ATTRIBUTES.
d. Select the desired text color and click OK.
e. Repeat steps b through d for each piece of text.
Outputting Plot Files from a PC to a Plotter
1. Connect the plotter to an output port of the computer (for example,
COMl).
2. If using the
COMl
port, output the
llle
to the plotter by using the following command:
C:>TYPEPLOTOO.FP>
COMI
4.22
Printing, Plotting, and Saving Measurement Results