Filter
Top Products
moves the title string data obtained with the
~:~~~~~~~~~~~~~L~,;:
co-ad
into
a
data
may.
.:::.
. . .
,,,.,.,.,.,.,.,..v.,
.,
,,.., ,,.
.
...%
.,....
. . . . . . . . .
~~~~~~.~:~~~~.”
strips off leading characters that are not
numeric, reads the numeric value, and then discards everything
else. The number is converted into analyzer internal format,
and is placed into the real portion of the memory trace at:
Display point = total points
-
1
-
loop counter
If the value of the loop counter is zero, then the title number
goes in the last point of memory. If the loop counter is greater
than or equal to the current number of measurement points,
the number is placed in the llrst point of memory. A data to
memory command must be executed before using the title to
memory command.
outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer
m
;...............;
. . . . . . . . . . . . . . .
I.............;....;;..
.+.:...:.:.:...
,,
c
. . . . . . . .
~~;:~~~~~~~
~~~~~~~~~~~~~
commands.
This
*
i.....;.....;..;.
. . . .
..A
i.,
/.i
.//./;....;.....~.
/....;;:......::
.._..........................
. . . . . . . .
..::::.......................
;.;..:
. . . .;,.~:.,;;~~~..;~.:.:.:.:.:.~~.~.:.:.~.~.~~:.:.~~.:.:.:.:.:.~
__/.//
(.~,;,,.~;~..~:...:...:
softkey is generally used for two purposes:
w
Sending a title to a printer when a CR-LF is not desired.
n
Sending commands to an HP-IB device.
outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer
(Z&)
.
..A
. . . . . .
<..a
. .
. . .
;.;...~....C.i..;..;..;...;;...........;........................
:...
-:
:..
.
..l
.:.
::i.:::::::::::::::::::::
‘:::::.~,
;:,,
:.:;.
‘“:~:;:~:~:
:,.,::j)
:/
:,,
~~~~~~,~.~~~~~
~~~~~~~~~~~~~~~~
commands.
This
;,..
L
. . . .
~~~~~._.,~..~
. . . . . . . . . . .
i
. . . . __ . . . . . . . . . . . . . . . . . .
. . . .
_
. . . . . . . . . . . . . . .
. . __ .
. . . . . . . . . . .
~.,.,.,_
:.,.;,I
.,.,,,,,
i
,.,._.,.,.,.,.,.,.,.,.
~,.:.~~:.:.:.:.:.:.:.:.:.:.:.~.:.:.:.:.:~~~~.:.:.~.~.~~:.~~~,.~.~:.~,.:.~~~,.;:.;:::;;:;~,.:.~.:~:.:.~~;~;:
softkey is generally used for two purposes:
w
Sending a title to a printer when a CR-LF is not desired.
n
Sending commands to an HP-IB device.
outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer
m
~~~~~~~~
~~~~~~~~~~
commands.
Tl,&
=feey
i
..r...:
is generally used for two purposes:
n
Sending a title to a printer for data logging or documentation
purposes
n
Sending commands to a printer or other HP-IB device.
is used in conjunction with other search features to track the
search with each new sweep. Turning tracking on makes the
analyzer search every new trace for the specified target value
and put the active marker on that point. If bandwidth search
is on, tracking searches every new trace for the specified
bandwidth, and repositions the dedicated bandwidth markers
When tracking is off, the target is found on the current sweep
and remains at the same stimulus value regardless of changes in
trace response value with subsequent sweeps.
A
maximm
and a minimum point can be tracked
simultaneously using two channels and uncoupled markers.
goes back to the two-port cal menu when transmission
measurements are finished.
Key
Definitions
849