Filter
Top Products
when editing a sequence,
False
Tg
.&ZLlZGT
appears when you
press
XT0
~E~~~.
When placed in a sequence, it presents
,.
the menu of up to 6 available sequences (softkeys containing
non-empty sequences). The message “CHOOSE ONE OF THESE
SEQUENCES” is displayed and the present sequence is stopped.
If the operator selects one of the sequences, that sequence is
executed. Any other key can be used to exit this mode. This
function is not executed if used during modify mode and
does nothing when operated manually. This softkey is not
visible on the display, and the function is not available, unless
programmed into analyzer memory.
selects the number of the pen to plot the data trace. The
default pen for channel 1 is pen number 2, and for channel 2 is
pen number 3.
selects the number of the pen to plot the graticule. The default
pen for channel 1 is pen number 1, and for channel 2 is pen
number 1.
selects the number of the pen to plot both the markers and the
marker values. The default pen for channel 1 is pen number 7,
and for channel 2 is pen number 7.
selects the number of the pen to plot the memory trace. The
default pen for channel 1 is pen number 5, and for channel 2 is
pen number 6.
selects the number of the pen to plot the text. The default pen
for channel 1 is pen number 7, and for channel 2 is pen
number 7.
adds or subtracts a phase offset that is
const,ant,with
frequency
(rather than linear). This is independent of
:m
&
-~+%V&AY
..::
:.:
..i
:.
,,.,......^,,,,
.::
and
;~~~~~~~ELA~
.
(Option 010 only) displays a Cartesian format of the phase
portion of the data, measured in degrees. This format displays
the phase shift versus frequency.
makes a hard copy plot of one page of the tabular listing on
the display, using a compatible HP plotter
COMeCted
to the
analyzer through HP-IB. This method is appropriate when speed
of output is not a critical factor.
specifies whether the data trace is to be drawn (on) or not
drawn (off) on the plot.
specifies whether the graticule and the reference line are
to..be
drawn (on) or not drawn (off) on the plot.
Ttuning
PJAT
~~T~~-Ora
and all other elements off is a convenient
way to make preplotted grid forms. However,. when data is to
be plotted on a preplotted form,
,$$$!$T
‘&&%~l?
should be
selected.
Key Definitions
9-31