4.
‘lb
set the span to 30 MHz, press:
&g(ziJm
Note
You could also press the
@
and
&TJ
keys and enter the frequency range
limits as start frequency and stop frequency values
Setting the Source Power.
5.
lb
change the power level to -5
dRm,
press:
Note
/
_
You could also press
~~~~.~~~~~~~~
~~~~~~:~,~~~~~
and select
one
of the
power ranges to keep the power setting within the
deGned
range.
Setting the Measurement.
6.
‘Ib
change the number of measurement data points to 101, press:
7. To select the transmission measurement, press:
8.
To
view the data trace, press:
Step 3.
Perform
and apply the appropriate error-correction.
9. Refer to the
“OpUmizing
Measurement Results” Chapter for procedures on correcting
measurement errors.
10. To save the instrument state and error-correction in the analyzer internal memory, press:
24 Making Measurements