Response Functions
pgE118d
Figure 6-7. Response Function Block
The following response function block keys are used to
define
and control the following
functions of the
act&
&anml.
n
IMeabJ:
measurement parameters
n
m:
data format
n
@ZKFJ
LDispla~:
display functions
.
n
LAvg):
noise
reduction alternatives
w
Local]:
calibration functions
n
C-1
LMarkerFctn_):
display markers
The current values for the major response functions of the active channel are displayed in
specific locations
along
the top of the display. In addition, certain functions accessed through
the keys in this block are annotated in the status notations area at the left side of the display.
An illustration of the analyzer’s display showing the locations of these information labels is
provided in Chapter 1, “Analyzer Description and Options.”
Note
You cannot assign a non-S-parameter measurement to any channel if either
auxihary
channel is enabled.
6-26
Application and Operation Concepts