Filter
Top Products
Instrument
Spectications
The specifications listed in
lhble
1 range from those guaranteed by Hewlett-Packard to those
typical of most HP 8753E instruments, but not guaranteed. Codes in the far right column
of Table 1 reference a specification
dellnition,
listed below. These definitions are intended
to clarify the extent to which Hewlett-Packard supports the specified performance of the
HP 8753E.
S-l: This performance parameter is verifiable using performance tests documented in the
service manual.
S-2:
Due to limitations on available industry standards, the guaranteed performance of the
instrument cannot be verified outside the factory.
Field
procedures can verify performance
with a confidence prescribed by available standards
S-3:
These specifications are generally digital functions or are mathematically derived from
tested specifications, and can therefore be verified by functional pass/fail testing.
T:
‘Typical
but non-warranted performance characteristics intended to provide information
useful in applying the
%trument.
Typical characteristics are representative of most
instruments, though not necessarily tested in each unit. Not field tested.
Specifications
and
Measurement
Uncertainties
J
14