Filter
Top Products
FUNCTIONNOTAVAILABLE
Error Number The function you requested over HP-IB is not avaiiable on the current
202
instrument.
FUNCTIONNOTVALID
Error Number The function you requested is incompatible with the current instrument state.
14
FUNCTIONNOTVALIDDURINGMOD
SEQUENCE
Error Number You cannot perform sequencing operations while a sequence is being modified.
131
FUNCTIONNOTVALIDFORINTERNALMEMORY
Error Number The function you selected
only
works with disk
Ivies.
201
FUNCTION
ONLYVALIDDURINGMOD
SEQUENCE
,.
_................,.,...,..
:~
..~:::~~:..
.:::.
.:.,
.~~,~:.::.::::.:.
;;
_,,_
..,
Error Number You can
only
use the
::~~~~~~~~
capability when you are
building
a
164
~~~~..~~~.~:.:.:.:.:.:.:.:.:.~,.~~.:.~~.,.:.:.::.:.:.:.:
_,,.,.,,
//_
.,/
__
,,_
y
sequence. Attempting to use this softkey at any other time returns an error
message and no action is taken.
HP
8753
SOURCEPARAMETERSCHANGED
Error Number Some of the stimulus parameters of the instrument state have been changed,
61
because you have turned correction on. A calibration set for the current
measurement parameter was found and activated. The instrument state was
updated to match the
stimuIus
parameters of the calibration state.
This message
also
appears when you have turned on harmonic mode or
frequency offset, and the present frequency range cannot be used with one of
these modes.
HPIBCOPY
INPROGRESS,
ABORTWITHLOCAL
Error Number An HP-IB copy was already in progress when you requested the HP-IB for
169
another function.
‘Ib
abort the first copy, press
ILocal),
otherwise the HP-IB is
unavailable until the first copy is completed.
lo-l.2
Error
Messsges