Restarting a Calibration
If you interrupt a calibration to go to another menu, such as averaging, you can continue the
ii
.,,.
c&brationby
pressing&
~,~~.~.~~~~~
softkey
in
the
co~e&ionmenu.
Cal Kit Menu
The
cal
kit menu provides access to a series of menus used to specify the characteristics of
calibration standards. The following softkeys are located within the
cal
kit menu:
The Select Cal Kit Menu
,,;.?
:
"'
i.
,,/
fiessbg
the
~~~~~~~~~~~~
softkey
with
the
cd
kit
menu
provides
access
to
the
select
cal
kit menu. This menu allows you to select from several default calibration kits that have
different connector types These kits have predeiined standards and are valid for most
applications. It is not possible to overwrite these standard
de&ritions
The numerical
definitions
for most Hewlett-Packard calibration kits can be referenced in the
calibration kit operating and service manuals, or can be viewed on the analyzer. The standard
deiinitions can also be modified to any set of standards used.
642
Application and Operation Concepts