Filter
Top Products
FORMat Subsystem
2–96
TVS600 & TVS600A Command Reference
FORMat:CALCulate
FORMat:CALCulate?
Sets or queries the type of data format used to transfer data produced by a CALC
block. The format applies to transfer through word serial and RS232 external
interfaces. The REAL type corresponds to a 32-bit Float type number in the C
programming language. FDC tranfers are always in binary format.
The number of significant digits returned by an ASCII data query is not
selectable. A setting of ASCii, 0 selects a format with a varying number of
significant digits depending on the origin of the data. Refer to the TVS600 &
TVS600A Series Waveform Analyzers User Manual for a definition of the data
formats for <type>.
FORMat[:DATA]:CALCulate[n] <type>[,<length>]
FORMat[:DATA]:CALCulate[n]?
<type>[,<length>] Query response
ASCii[,0]
REAL,32
ASC,0
REAL,32
ASC,0
Execution Error –224, “Illegal parameter value”
Attempted to set format to an illegal value.
None
Command: FORM:CALC2 REAL,32
Query: FORM:CALC2?
Response: REAL,32
CALCulate:DATA?
TRACe[:DATA]?
FORM:BORD
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands