Filter
Top Products
TVS600 & TVS600A Command Reference
2–245
TRIGger:B Subsystem
This section describes the commands in the TRIGger:B subsystem. See
Figure 2–28. These commands operate with the ARM, INITiate, TRIGger[:A]
and ABORt subsystems to trigger acquisitions. The TRIGger:B subsystem is an
alias for the SCPI SEQuence2 trigger block. The defined alias for the SCPI
trigger :SEQuence[2] is :B.
TRIGger
:B | :SEQuence2
:SOURce:LEVel :SLOPe:COUPling :FILTer:DEFine? :ECOunt:DELay
Figure 2–28: TRIGger:B (SCPI SEQuence2) subsystem hierarchy