Filter
Top Products
INPut Subsystem
2–126
TVS600 & TVS600A Command Reference
1.0E+6
Execution Error –222, “Data out of range”
Attempted to set impedance to an illegal value.
Execution Error –241, “Hardware missing”
Attempted to program INPut3 or INPut4 on an
instrument configured with two channels.
None
Command: INP1:IMP 1E6
Response: INP1:IMP?
Query: 1.0E+6
INPut:PROTection:STATe
INPut:PROBe:ATTenuation?
Queries the attenuation ratio of a connected probe.
A value of 1 indicates that a 1X probe is attached or that no probe is attached.
INPut[1]:PROBe:ATTenuation?
INPut2:PROBe:ATTenuation?
INPut3:PROBe:ATTenuation?
INPut4:PROBe:ATTenuation?
<attenuation factor> Query response
Not applicable <NR1>
None
Not applicable
Execution Error –241, “Hardware missing”
Attempted to query INPut3 or INPut4 when
the instrument is configured with two channels.
Reset Value
Errors and Events
Dependencies
Examples
Related Commands
Syntax
Parameters
Suffix Units and
Multipliers
Reset Value
Errors and Events