Filter
Top Products
AADVance Subsystem
TVS600 & TVS600A Command Reference
2–5
AADVance:COUNt
AADVance:COUNt?
Sets or queries the number of records to acquire in the auto-advance acquisition
mode. The maximum number of Auto-advance records that you can acquire
depends on the record length and the number of active channels. A setting of
zero (0) acquires enough records to fill the DSP memory, regardless of the
current acquisition system settings. MAXimum acquires enough records to fill
DSP memory based on the current acquisition settings. The distinction is that
with a change such as the number of active channels, the MAXimum COUNt
setting is not adjusted, whereas the zero COUNt setting adjusts to ensure
memory is just filled within the new conditions.
To determine the current value for MAX, first set all acquisition parameters. Set
AADV:COUN to MAX. Finally, query with AADV:COUN? to return the current
value for MAX.
[SENSe:]AADVance:COUNt <count>
[SENSe:]AADVance:COUNt?
<count> Query response
<NRf>
0 (Fill acquisition memory)
1 to MAX (Acquire number)
MINimum
MAXimum
<NR1>
1
<depends on configuration>
1
Execution Error –222, “Data out of range”
Attempted to set count to an illegal value.
None
Command: AADV:COUN 100
Query: AADV:COUN?
Response: 100
AADVance
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands