Filter
Top Products
OUTPut Subsystem
2–142
TVS600 & TVS600A Command Reference
OUTPut:PCOMpensate:FUNC
OUTPut:PCOMpensate:FUNCtion
OUTPut:PCOMpensate:FUNCtion?
Sets or queries the source for the probe compensation signal which is output on
the front-panel connector PROBE COMPENSATION. Use the command
OUTPut:PCOMpensate to enable the signal. You can select either CLOCk at
1 kHz and 500 mV peak-to-peak amplitude or VOLT with a 500 mV DC level.
When compensating probes, use the BNC-to-probe tip adapter recommended by
the probe manufacturer and connect the probe ground lead to signal ground.
OUTPut:PCOMpensate:FUNCtion <function>
OUTPut:PCOMpensate:FUNCtion?
<function> Query response
CLOCk
VOLTage
CLOC
VOLT
CLOC
Execution Error –141, “Invalid character data”.
Attempted to set function to an illegal value.
None
Command: OUTP:PCOM:FUNC VOLT
Query: OUTP:PCOM:FUNC?
Response: VOLT
OUTPut:PCOMpensate
Related Commands
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands