Filter
Top Products
TRIGger:PULSe Subsystem
TVS600 & TVS600A Command Reference
2–277
TRIGger:PULSe:TIMEout:WIDTh
TRIGger:PULSe:TIMEout:WIDTh?
TVS600A Models Only
Sets or queries the width of the pulse.
:A is a pre–defined alias for :SEQuence[1].
This command only has effect when TRIGger:TYPE is set to PULSe and
TRIGger:PULSe:CLASs is set to TIMEout.
TRIGger[:A]:PULSe:TIMEout:WIDTh <width>
TRIGger[:A]:PULSe:TIMEout:WIDTh?
<width> Query response
<NRf>
MINimum
MAXimum
<NR3>
2.0E–9
1.0E+0
S (default), MS, US, NS, or PS
2.0E–9
Execution Error –222, “Data out of range”
Attempted to set width to an illegal value.
None
Command: TRIG:PULS:TIME:WIDT 1.0
Query: TRIG:PULS:TIME:WIDT?
Response: 1.0E+0
TRIGger:TYPE
TRIGger:PULSe:CLASs
TRIGger:PULSe:TIMEout:POLarity
Syntax
Parameters
Suffix Units and
Multipliers
Reset Value
Errors and Events
Dependencies
Examples
Related Commands