Filter
Top Products
SYSTem Subsystem
2–206
TVS600 & TVS600A Command Reference
Not applicable
Execution Error –203, “Command protected”
Attempted to execute this command without first removing the protection with
the command SYSTem:PROTect.
All measurement data and instrument settings are lost upon execution.
Command: SYST:SEC:IMM
*RST
SYSTem:SET
SYSTem:SET?
Sets or queries the internal state of the instrument as a binary data block. The
format of the binary data is instrument specific and should not be modified if
you intend to use it to set the instrument state. Binary settings may not be
compatible with other models or firmware versions of the TVS600 Series
Waveform Analyzers. Use the *LRN? query to get an ASCII version of the
instrument settings.
SYSTem:SET <settings>
SYSTem:SET?
<settings> Query response
<def_len_block> or
<indef_len_block>
<def_len_block>
Not applicable
Execution Error –233, “Invalid version”
Attempted to load a block of binary settings that have a version number different
from that of the instrument.
None
Command: SYST:SET #45000 . . .
Reset Value
Errors and Events
Dependencies
Examples
Related Commands
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples