Filter
Top Products
TRIGger:TRANsition Subsystem
TVS600 & TVS600A Command Reference
2–299
TRIGger:TRANsition:SOURce
TRIGger:TRANsition:SOURce?
TVS600A Models Only
Sets or queries the trigger source for all transition triggering classes.
:A is a predefined alias for :SEQuence[1].
This command only has effect when TRIGger:TYPE is TRANsition.
Setting source to INTernal1 causes the signal from INPut1 and [SENSe:]VOLT-
age1 to be the trigger source.
TRIGger[:A]:TRANsition:SOURce <source>
TRIGger[:A]:TRANsition:SOURce?
<source> Query response
INTernal
INTernal1
INTernal2
INTernal3
INTernal4
INT
INT1
INT2
INT3
INT4
None
INT
Command Error –141, “Invalid character data”
Attempted to set source to an illegal value.
None
Command: TRIG:TRAN:SOUR INT3
Query: TRIG:TRAN:SOUR?
Response: INT3
TRIGger:TYPE
Syntax
Parameters
Suffix Units and
Multipliers
Reset Value
Errors and Events
Dependencies
Examples
Related Commands