Filter
Top Products
IEEE 488.2 Common Commands
2–326
TVS600 & TVS600A Command Reference
Response: 96
This response indicates the MAV and the MSS bits are set.
*SRE
*TRG
Arms the waveform analyzer to accept triggers from the VXIbus. Before using
*TRG, you must start the Arm/Trigger system with the INITiate command and
use ARM:SOURce to select BUS.
*TRG
None
Not applicable
Execution Error –212, “Arm ignored”
Sent the *TRG command or the VXIbus word serial command <Trigger> when
ARM:SOURce was not set to BUS or when the instrument was not in the
“Waiting for Arm” state.
None
Command: *TRG
INITIATE
ARM:SOURCE
Related Commands
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands