Filter
Top Products
IEEE 488.2 Common Commands
2–324
TVS600 & TVS600A Command Reference
*SRE
*SRE?
Sets or queries the Service Request Enable Register (SRER). The SRER
determines which events in the Status Byte Register can generate an interrupt to
the system controller. The SRER bits correspond to the bits in the Status Byte
Register, which are described in Table 2–7 on page 2–325.
STATus:PRESet does not change the Service Request Enable Register. For more
information on the Status and Events reporting system, refer to the TVS600 &
TVS600A Series Waveform Analyzers User Manual.
*SRE <mask>
*SRE?
<mask> Query response
<NRf> | <Non-decimal numeric>
0 ≤ N ≤ #HFF
<NR1>
Not applicable
None
None
Command: *SRE #H60
Query: *SRE?
Response: 96
*STB?
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands