Filter
Top Products
TRIGger:SHOLdtime Subsystem
2–286
TVS600 & TVS600A Command Reference
TRIGger:SHOLdtime:CLOCk:THReshold
TRIGger:SHOLdtime:CLOCk:THReshold?
TVS600A Models Only
Sets or queries the trigger threshold for the clock when setup and hold time
violation triggering is selected.
:A is a predefined alias for :SEQuence[1].
The minimum and maximum values for threshold are VOLT:RANG:OFFS +/–
VOLT:RANG:PTP (in VOLT:RANG:PTP * 0.002 steps).
This command only has effect when TRIGger:TYPE is SHOLdtime.
TRIGger[:A]:SHOLdtime:CLOCk:THReshold <level>
TRIGger[:A]:SHOLdtime:CLOCk:THReshold?
<level> Query response
<NRf>
MINimum
MAXimum
<NR3>
<See Comments>
<See Comments>
V (default), MV, or UV
0.0E+0
Execution Error –222, “Data out of range”
Attempted to set threshold to an illegal value.
None
Command: TRIG:SHOL:CLOC:THR 1.0
Query: TRIG:SHOL:CLOC:THR?
Response: 1.0E+0
TRIGger:TYPE
TRIGger:SHOLdtime:CLOCk:SOURce
Syntax
Parameters
Suffix Units and
Multipliers
Reset Value
Errors and Events
Dependencies
Examples
Related Commands