Filter
Top Products
OUTPut Subsystem
2–140
TVS600 & TVS600A Command Reference
OUTPut:ECLTrg<n>:SOURce
OUTPut:ECLTrg<n>:SOURce?
Sets or queries the waveform analyzer source used to drive each VXIbus ECL
trigger line.
H ARM — a valid ARM event occurs which enables the TRIG:A circuit
H ATR — a valid trigger event from the TRIGger A subsystem
H BTR — a valid trigger event from the TRIGger B subsystem
H OPC — the signal indicating the active command is complete. It is derived
from the Operation Complete bit in the Standard Event Status Register.
H CALC — a true evaluation of the TRG function in a CALC expression has
occurred
The waveform analyzer can simultaneously source and sense an ECL trigger
line.
OUTPut:ECLTrg<n>:SOURce <source>
OUTPut:ECLTrg<n>:SOURce?
<n> (Line number) Query response
0
1
Not applicable
<source> Query response
ARMed
ATRigger
BTRigger
OPC
CALC
ARM
ATR
BTR
OPC
CALC
ATR (ECLTrg1)
BTR (ECLTrg0)
Execution Error –141, “Invalid character data”.
Attempted to set source to an illegal value.
None
Syntax
Parameters
Reset Value
Errors and Events
Dependencies