Filter
Top Products
TRIGger:PULSe Subsystem
2–276
TVS600 & TVS600A Command Reference
TRIGger:PULSe:TIMEout:POLarity
TRIGger:PULSe:TIMEout:POLarity?
TVS600A Models Only
Sets or queries the polarity for pulse timeout triggering.
:A is a pre–defined alias for :SEQuence[1].
This command only has effect when TRIGger:TYPE is set to PULSe and
TRIGgger:PULSe:CLASs is set to TIMEout.
TRIGger[:A]:PULSe:TIMEout:POLarity <polarity>
TRIGger[:A]:PULSe:TIMEout:POLarity?
<polarity> Query response
NEGative
POSitive
NEG
POS
None
POS
Command Error –141, “Invalid character data”
Attempted to set polarity to an illegal value.
None
Command: TRIG:PULS:TIME:POL NEG
Query: TRIG:PULS:TIME:POL?
Response: NEG
TRIGger:TYPE
TRIGger:PULSe:CLASs
TRIGger:PULSe:TIMEout:WIDTh
Syntax
Parameters
Suffix Units and
Multipliers
Reset Value
Errors and Events
Dependencies
Examples
Related Commands