Filter
Top Products
Command Syntax
1–2
TVS600 & TVS600A Command Reference
command descriptions, which start on page 2–1, list the valid values for all
parameters.
For example, OUTPUT:TTLTRG1:STATE ON is a valid SCPI command created
from the hierarchy tree in Figure 1–1.
To create a query, start at the root node of a tree structure, move down to the end
of a branch, and add a question mark. OUTPUT:TTLTrg:STATe? is an example
of a valid SCPI query using the hierarchy tree in Figure 1–1.
Every parameter in the command and query descriptions is of a specified type.
The parameters are enclosed in brackets, such as <pattern>. The parameter type
is listed after the parameter and is enclosed in parentheses, for example,
(discrete). Some parameter types are defined specifically for the waveform
analyzer command set and some are defined by ANSI/IEEE 488.2-1992 (see
Table 1–1).
Creating Queries
Parameter Types