Filter
Top Products
STATus Subsystem
TVS600 & TVS600A Command Reference
2–159
None
Command: STAT:OPER:QEN:NTR #H0001
Query: STAT:OPER:QEN:NTR?
Response: 1
STATus:OPERation?
STATus:OPERation:QENable:PTRansition
STATus:OPERation:CONDition?
STATus:OPERation:NTRansition
STATus:PRESet
STATus:OPERation:QENable:PTRansition
STATus:OPERation:QENable:PTRansition?
Sets or queries the contents of the Positive Transition Queue Enable Register
(PTQER) for the Operation Status Register. When you set an event bit true (1) in
the PTQER, the corresponding event the Operation Status Condition Register
generates a message in the Status Queue when the event line changes from false
to true (0 to 1).
The PTQER bits correspond to the Operation Status Register
bits. Refer to Table 2–2 on page 2–152 for a definition of the events associated
with the Operation Status Register bits. The command STATus:OPERa-
tion:QENable:NTRansition provides similar control for negative event transi-
tions. For an overview of the status and event reporting system, refer to the
TVS600 & TVS600A Series Waveform Analyzers User Manual.
STATus:PRESet sets all register bits to zero (0) which disables reporting positive
event transitions. Setting unused enable bits does not generate an error, they are
ignored.
STATus:OPERation:QENable:PTRansition <mask>
STATus:OPERation:QENable:PTRansition?
<mask> Query response
<NRf> | <Non-decimal numeric>
0 ≤ N ≤ #HFFFF
<NR1>
Not applicable
Dependencies
Examples
Related Commands
Syntax
Parameters
Reset Value