Filter
Top Products
CALCulate Subsystem
2–50
TVS600 & TVS600A Command Reference
Calculations based on the CALC:PATH:EXPression command are based on the
SCPI Expression model. See the TVS600 & TVS600A Series Waveform
Analyzers User Manual for a description of the SCPI model.
CALCulate<n>:PATH:EXPRession <path_expression>
CALCulate<n>:PATH:EXPRession?
<n>
1
Query response
1
2
3
4
Not applicable
1
The calculate block number <n> selects one of four calculate blocks. If you omit <n>,
the default is calculate block 1.
<path_expression> ( algebraic syntax
expression)
Query response
<expression> (algebraic syntax expression) <expression> (algebraic syntax expression)
( )
Execution Error –241, “Hardware missing”
Attempted to define a path expression that requires CHAN3 or CHAN4 when the
instrument is configured with two channels.
The :CALCulate subblock cannot detect most errors until execution time. If
errors do occur, they are described with the failed :CALCulate function or with
the description of any other failed system function.
None
Command: CALC1:PATH:EXPR (RTIM(CHAN1+CHAN2))
Query: CALC1:PATH:EXPR?
Response: (RTIM(CHAN1+CHAN2))
CALCulate:PATH
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands