Filter
Top Products
FUNCtion and DATA Subsystems
2–110
TVS600 & TVS600A Command Reference
FUNCtion[:ON]
FUNCtion:OFF
FUNCtion:CONCurrent
DATA? (Query Only)
Returns the results for the specified function or for all sense functions that are
enabled. If auto-advance acquisition is on, then DATA? returns all acquisition
records through AADV:RECord:COUNt, beginning with
AADV:RECord:STARt, for the specified channel. The format of the data is
determined by the FORMat subsystem. The format applies to transfer through
word serial and RS232 external interfaces only.
When you specify a sense function, DATA? returns only the results of the
specified function. When no sense function is specified, DATA? returns the
results of all sense functions that are enabled. The data is returned in ascending
channel order. You can access individual auto-advance records with commands
from the TRACe and CALCulate subsystems.
DATA? does not return data until pending acquisitions or calculations are
complete. You can use the commands *WAI, *OPC, or *OPC? to synchronize
the response in a different manner.
Channel names and function strings may be used interchangeably for parameters.
This is not standard SCPI practice and does not provide horizontal compatibility.
[SENSe:]DATA? [<function>]
<function> Query response
“XTIMe:VOLTage[:DC] 1” or CHAN1
“XTIMe:VOLTage[:DC] 2” or CHAN2
“XTIMe:VOLTage[:DC] 3” or CHAN3
“XTIMe:VOLTage[:DC] 4” or CHAN4
Not applicable
<data> Query response
Not applicable Defined by FORMat[:DATA]
Not applicable
Execution Error –224, “Illegal parameter value”
Attempted to query data from an invalid sense function.
Related Commands
Syntax
Parameters
Reset Value
Errors and Events