Filter
Top Products
STATus Subsystem
2–154
TVS600 & TVS600A Command Reference
STATus:OPERation:CONDition? (Query Only)
Returns the contents of the Operation Status Condition Register (OSCR). The
OSCR bits correspond to the Operation Status Register bits. The query response
from the Operation Status Condition Register gives the current state of the
Operation event lines prior to the Operation Transition Registers. The query
returns the current setting as a decimal number whose bits correspond to the
Operation Status Register bits. Refer to Table 2–2 on page 2–152 for a definition
of the events associated with the Operation Status Register bits. For an overview
of the status and event reporting system, refer to the TVS600 & TVS600A Series
Waveform Analyzers User Manual.
Note that reading this register does not clear it and unused bits always return
zero.
STATus:OPERation:CONDition?
<condition> Query Response
Not applicable <NR1>
Not applicable
None
None
Query: STAT:OPER:COND?
Response: 1
STATus:OPERation?
STATus:OPERation:ENABle
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands