Filter
Top Products
TRACe Subsystem
2–220
TVS600 & TVS600A Command Reference
TRACe:COPY
Copies acquisition or measurement data, or reference waveform records, to the
outgoing Fast Data Channel (FDC), or to reference waveform records (REF1 to
REF10). The CHAN1 to CHAN4 and CALC1 to CALC4 commands refer to the
corresponding input channel or CALC block result. LIST includes all traces
defined with the command TRACe:LIST. Traces with no data are copied as null
blocks. No error is generated.
There is no associated query for this command.
For more information, refer to the TVS600 & TVS600A Series Waveform
Analyzers User Manual.
TRACe:COPY <destination>, <source>
DATA:COPY <destination>, <source>
<destination> Query response
FDC1
REF1 .. REF10
Not applicable
<source> Query response
CHAN1
CHAN2
CHAN3
CHAN4
AATS
CALC1
CALC2
CALC3
CALC4
LIST
1
REF1 .. REF10
Not applicable
1
Fast Data Channel only
Not applicable
Execution Error –141, “Invalid character data”
Attempted to copy data to or from an invalid trace name.
Execution Error –211, ”Settings conflict”
Attempted to transfer data from a trace LIST to a REF waveform.
Syntax
Parameters
Reset Value
Errors and Events